Manufacturer Customized Synchronous Ribber Transmission Power V Belt for Industrial and Agricultural

After a long-term development, our company has a profound understanding of the Multi Ribbed Belt, Fan Belts, Open Ended Timing Belt industry and strives to build a complete industrial chain. We adhere to a serious and rigorous manufacturing philosophy and professional and efficient attitude, committed to building a first-class brand. We always welcome new and old customers presents us with valuable advice and proposals for cooperation, let us grow and develop together, and to contribute to our community and staff!

Features

● Accurate transmission, no slip, with a constant transmission ratio.

● Easy maintenance, no need of lubrication, low maintenance cost.

● Can be used for long distance transmission, center distance up to more than 10m .

● Compared with V-belt transmission, the preload is smaller, and the load on the shaft and bearing is smaller

● High efficiency due to positive engagement between the Belt teeth and pulley grooves

Specification

Applications

Paper and textile machinery, CNC machines, printers, scanners, office machines, Robotic machines, electric hand tools, currency counting machines, food processing machines, Machine tools, computer, printers, sewing machines, oil pumps, etc.

Production Details

① Superior polychloroprene backing

② Superior Fibre-glass cord

③ High modulus Fibre loaded polychloroprene rubber compound

④ Nylon 66 stretch fabric teeth for high wear resistance

Installation

① When installing the synchronous belt, if the center distance of the two belt wheels can be moved, the center distance of the belt wheels must be shortened first, and then the center distance shall be reset after the synchronization belt is installed. If there is a tensioning wheel, first loosen the tensioning wheel, then install the synchronous belt, then install the tensioning wheel.

② When install the belt to pulley, remember not to force too much, or with a screwdriver forced pry synchronous belt, in order to prevent the tensile layer in the belt produced invisible appearance of breaking phenomenon. When designing the pulley, it is better to choose the structure that the two axes can move close to each other. If the structure does not allowed, it is better to install the synchronous belt and the pulley on the corresponding shaft.

③ In the synchronous belt drive, the parallelism of the axis of the two belts have high requirement, otherwise the synchronous belt will run off-track or even jump out of the pulley during working. Non-parallel axis will also cause uneven pressure, so that the tooth wear early.

We are a world class front-runner in manufacturing Manufacturer Customized Synchronous Ribber Transmission Power V Belt for Industrial and Agricultural. We are responsive to our customers' needs – always going that extra mile to support them in achieving their business goals and sustainability targets. We have strong R&D capability to meet the requirements of high quality, short delivery time and diversification. With the continuous expansion of the company's scale and deepening of business philosophy, our company is adjusting its business strategy at any time with the changes of the market.