Pioneer Car engine belt uses CR or EPDM as main rubber material, polyester cord or aramid fiber as reinforcement material, manufactured strictly according to technical standards. The belt has the advantages of good flexibility, steady transmission, low noise and long life etc.
We adhere to the business philosophy of "integrity-based, high-quality and high-efficiency", pay attention to customer needs, pursue customer satisfaction, survive by service, develop by quality, continuously optimize product lines, provide customers with one-stop service, and strive to be global Leading V Belt, Cogged V Belt, Car Drive Belt supplier. We are fully capable of developing and supplying products of high quality and moderate price for our customers. We use advanced machines and strong professional technology to produce high-quality and cost-effective products to meet customer needs.
Features
● High temperature resistance comparable to HNBR
● Cold resistance better than ASCM,HNBR and CR
● Good wear and pilling resistance
● Alternator serpentine belt linear belt speeds up to 60 m/s
● High strength and heat memory tensile cord is made of special material. With its features of high transmission efficiency and thermal shrinkage, it can keep the constant length and prolong the belt lifespan.
Specification
SPECIFICATION | ||||||
Section | Width (mm) | Thickness (mm) | Rib Pitch (mm) | Min. Pulley Dia. (mm) | Manufacturing Range | |
Min. (mm) | Max. (mm) | |||||
3PK | 10 | 4.5 | 3.56 | 45 | 300 | 5000 |
4PK | 13.6 | 4.5 | 3.56 | 45 | 300 | 5000 |
5PK | 17 | 4.5 | 3.56 | 45 | 300 | 5000 |
6PK | 20.7 | 4.5 | 3.56 | 45 | 300 | 5000 |
7PK | 24.3 | 4.5 | 3.56 | 45 | 300 | 5000 |
8PK | 27.8 | 4.5 | 3.56 | 45 | 300 | 5000 |
9PK | 31.4 | 4.5 | 3.56 | 45 | 300 | 5000 |
10PK | 35 | 4.5 | 3.56 | 45 | 300 | 5000 |
11PK | 37.4 | 4.5 | 3.56 | 45 | 300 | 5000 |
12PK | 40.8 | 4.5 | 3.56 | 45 | 300 | 5000 |
Applications
Alternator drive belts widely used in Automotive industry.
Alternator fan belt wear analysis
① GRAVEL PENETRATION
Appearance: Small pinholes are visible on the backside of the belt. Bumps may be visible and fabric around the holes can be frayed.
Cause: Granular gravel or pebble gravel is wedged between the belt groove(s) and pulley ridge(s). Cars where the engine protection shield is missing are likely to have this problem.
Solution: Check the entire drive and then replace with a Pioneer poly v belt, which is precision ground in the factory for a better pulley fit. Make sure the new belt runs on perfect pulleys. Install an engine protection shield.
② OIL CONTAMINATION
Appearance: The belt surface is flaky, sticky or swollen.
Cause: Oil and grease are a rubber compound's worst enemies, weakening the compound's bonds and making the belt soft and spongy. Eventually, such a belt will slip, create heat and fail.
Solution: Eliminate sources of oil, grease or chemical contamination. Replace the belt. Do not use belt sprays.
Over the years, our Popular Size 138s8m23 Drive Belt Engine Belt 06A109119c for VW Car Good Quality Factory Price has passed the market test and has been recognized by our customers. We believe that talent is the first resource of the enterprise, therefore we strive to create a good development atmosphere for talents. One of the effective ways to improve the competitiveness of enterprises is to carry out performance management.
Hot Tags: Alternator Fan Belt, China, suppliers, manufacturers, factory, wholesale, for sale, Timing Belts, Automotive Timing Belts, Alternator Drive Belt, Ribbed V Belt, Fan Belts, Fan Belt Car