Punched Open-Ended Micro Banded Generator Fhp V-Belt

We have a high quality automated production line that can develop and produce exquisite Serpentine Belt, A Section V Belt, PJ Belt for promoting the common development of domestic and foreign industries. The company adheres to the product positioning of producing high-performance seamless steel pipes and continuously improves the quality. We will not forget our original intention and keep our mission in mind, and make a contribution to the realization of the Chinese dream of the great rejuvenation of the Chinese nation.

Features

● The transmission power is large, 30% higher than that of the ordinary V-belt when the space is the same.

● The transmission system has a compact structure. Under the same transmission power, the space occupied by the transmission device is 25% smaller than that of an ordinary V-belt

● The micro v belt is thin and flexible. It is suitable for transmission with small pulley diameters and high-speed transmission. The belt speed can reach 40m/s; it has low vibration, low heat generation and stable operation.

● Heat resistance, oil resistance, abrasion resistance, low elongation in use, long life

Specification

Applications

The applications of serpentine belt in the automotive and industry, such as for car engine belt, industrial dryers, fitness equipment, electric tool, high speed blowers, and so on.

Production Details

1. Reinforced CR and EPDM material to ensure better wear resistance and high temperature resistance

2. HMLS Polyester: Less elongation give maximum power transmission

3. Aramid fiber reduce noise

TIPS

Precautions When Using

① If there is oil or water in use, it should be removed or wiped dry in time;

② If the wrap angle is too small, the position of the back pulley should be changed to increase the wrap angle;

③ If the belt tension is too small, increase the belt tension appropriately;

Noise during use

④ Keep the belt dry to prevent noise from slipping;

⑤ Foreign matter is embedded in the wedge groove, and the foreign matter should be removed in time;

⑥ Belt pulley deflection produce noise, then adjust the position of the pulley;

⑦ Vibration is large in the use of the product: It may be that the belt tension is too small, and the tension should be increased appropriately;

We can design and process according to the actual situation of users and their requirements, and fully solve the various needs of users in Punched Open-Ended Micro Banded Generator Fhp V-Belt. We care about the growth of our staff, strengthen the ability of execution, pursue high efficiency and harmony, and balance incentive and restraint. We always insist on the management tenet of 'Quality is First, Technology is Basis, Honesty and Innovation'.