Pioneer Car engine belt uses CR or EPDM as main rubber material, polyester cord or aramid fiber as reinforcement material, manufactured strictly according to technical standards. The belt has the advantages of good flexibility, steady transmission, low noise and long life etc.
After months of hard observation, research and testing, our EPDM Belt, Serpentine Belt, Car Drive Belt can stand the test of the market. It is our excellent spirit of innovation and struggle that inspires us to be the first in the world, to be the pioneer of the times and to move forward. We have set the strategic goal of building an industry benchmark that will last forever and will continue to work towards this goal. Our company has always put the interests of customers above our own interests, and has been widely praised. We are committed to providing the most convenient delivery, the most comprehensive range of products and services with the best cost performance, and to providing our customers with a one-stop procurement platform.
Features
● High temperature resistance comparable to HNBR
● Cold resistance better than ASCM,HNBR and CR
● Good wear and pilling resistance
● Alternator serpentine belt linear belt speeds up to 60 m/s
● High strength and heat memory tensile cord is made of special material. With its features of high transmission efficiency and thermal shrinkage, it can keep the constant length and prolong the belt lifespan.
Specification
SPECIFICATION | ||||||
Section | Width (mm) | Thickness (mm) | Rib Pitch (mm) | Min. Pulley Dia. (mm) | Manufacturing Range | |
Min. (mm) | Max. (mm) | |||||
3PK | 10 | 4.5 | 3.56 | 45 | 300 | 5000 |
4PK | 13.6 | 4.5 | 3.56 | 45 | 300 | 5000 |
5PK | 17 | 4.5 | 3.56 | 45 | 300 | 5000 |
6PK | 20.7 | 4.5 | 3.56 | 45 | 300 | 5000 |
7PK | 24.3 | 4.5 | 3.56 | 45 | 300 | 5000 |
8PK | 27.8 | 4.5 | 3.56 | 45 | 300 | 5000 |
9PK | 31.4 | 4.5 | 3.56 | 45 | 300 | 5000 |
10PK | 35 | 4.5 | 3.56 | 45 | 300 | 5000 |
11PK | 37.4 | 4.5 | 3.56 | 45 | 300 | 5000 |
12PK | 40.8 | 4.5 | 3.56 | 45 | 300 | 5000 |
Applications
Alternator drive belts widely used in Automotive industry.
Alternator fan belt wear analysis
① GRAVEL PENETRATION
Appearance: Small pinholes are visible on the backside of the belt. Bumps may be visible and fabric around the holes can be frayed.
Cause: Granular gravel or pebble gravel is wedged between the belt groove(s) and pulley ridge(s). Cars where the engine protection shield is missing are likely to have this problem.
Solution: Check the entire drive and then replace with a Pioneer poly v belt, which is precision ground in the factory for a better pulley fit. Make sure the new belt runs on perfect pulleys. Install an engine protection shield.
② OIL CONTAMINATION
Appearance: The belt surface is flaky, sticky or swollen.
Cause: Oil and grease are a rubber compound's worst enemies, weakening the compound's bonds and making the belt soft and spongy. Eventually, such a belt will slip, create heat and fail.
Solution: Eliminate sources of oil, grease or chemical contamination. Replace the belt. Do not use belt sprays.
We pursue development in accordance with science and technology and continuously provide users with safe and satisfactory Top Quality Rubber Sychronous Car Engine Timing Belt. With the ultimate goal in our mind, we will definitely seize every opportunity to expand our market and find the right place for us, making our company a most competitive one in its line. In the fierce market competition, the company adheres to the spirit of "innovative and pragmatic" to make products increasingly mature and perfect.
Hot Tags: Alternator Fan Belt, China, suppliers, manufacturers, factory, wholesale, for sale, Speed Belts, Ribbed Belt, Go Kart Drive Belt, Pk Belt, Open Ended Timing Belt, Alternator Belt